y.view
Class BezierEdgeRealizer

java.lang.Object
  y.view.EdgeRealizer
      y.view.BezierEdgeRealizer

All Implemented Interfaces:

EdgeLayout

public class BezierEdgeRealizer
extends EdgeRealizer

This realizer draws an edge as a bezier (cubic) spline curve. The bends are interpreted as control points for the curve. The control points of this curve type do not lie on the curve itself. Every 2nd segment (starting with the 3rd) formed by the control points is tangential to the curve at the point lying in the middle of that segment.

Field Summary

Fields inherited from class y.view.EdgeRealizer

bends, path, PATH_CLIPPED_AT_SOURCE, PATH_CLIPPED_AT_SOURCE_AND_TARGET, PATH_CLIPPED_AT_TARGET, PATH_INVISBLE, PATH_UNCLIPPED

Constructor Summary

BezierEdgeRealizer()
Default Constructor.

BezierEdgeRealizer(EdgeRealizer r)
Constructs a new BezierEdgeRealizer as a copy of the given realizer.

Method Summary

protected byte	calculatePath(java.awt.geom.Point2D sourceIntersectionOut, java.awt.geom.Point2D targetIntersectionOut) Recalculates the bezier curve path after this realizer has been marked as dirty.
void	calcUnionRect(java.awt.geom.Rectangle2D r) Calculate the union of rectangle enclosed by this realizer and r.
boolean	contains(double x, double y) Tests whether or not the given coordinate hits the path of this realizer.
Bend	createBend(double x, double y, Bend refBend, int dir) Adds a new bend before or after the given reference bend.
EdgeRealizer	createCopy(EdgeRealizer er) Creates a copy of this realizer type that is initialized with the attributes of the given realizer.
Bend	insertBend(double x, double y) Inserts a new bend at location (x,y) into this realizer.
boolean	intersects(java.awt.geom.Rectangle2D box) Checks whether the given rectangle overlaps the edge.
protected void	paintHighlightedBends(java.awt.Graphics2D gfx) Specialized paint method.
void	read(java.io.ObjectInputStream in) Deprecated. Use the GraphML format instead.
void	reInsertBend(Bend bend, Bend refBend, int dir) Reinserts a bend to the edge which had been removed before.
Bend	removeBend(Bend b) Removes a Bend of this realizer
void	write(java.io.ObjectOutputStream out) Deprecated. Use the GraphML format instead.

Methods inherited from class y.view.EdgeRealizer

addLabel, addPoint, appendBend, bendChanged, bendCount, bendPos, bends, bindEdge, calculateClippingAndIntersection, clearBends, clearPoints, containsSeg, createCopy, createEdgeLabel, firstBend, getArrow, getArrowScaleFactor, getBend, getEdge, getHighlightedBendColor, getLabel, getLabel, getLabelText, getLayer, getLineColor, getLineType, getMinBendCount, getMouseInputEditorProvider, getPath, getPoint, getSelectionColor, getSelectionStroke, getSourceArrow, getSourceIntersection, getSourcePoint, getSourcePort, getSourceRealizer, getTargetArrow, getTargetIntersection, getTargetPoint, getTargetPort, getTargetRealizer, hasVisiblePath, isDirty, isLabelRenderingOrderInverted, isPathClippedAtSource, isPathClippedAtTarget, isReversedPathRenderingEnabled, isSelected, isVisible, labelBoundsChanged, labelCount, lastBend, paint, paintArrows, paintBends, paintLabels, paintPorts, paintSloppy, pathIntersects, pointCount, recalculateFeatures, registerObstacles, removeLabel, removeLabel, repaint, setArrow, setDirty, setHighlightedBendColor, setLabelRenderingOrderInverted, setLabelText, setLayer, setLineColor, setLineType, setPoint, setPorts, setReversedPathRenderingEnabled, setSelected, setSelectionColor, setSelectionStroke, setSourceArrow, setSourcePoint, setSourcePort, setTargetArrow, setTargetPoint, setTargetPort, setVisible

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

BezierEdgeRealizer

public BezierEdgeRealizer()

Default Constructor.

BezierEdgeRealizer

public BezierEdgeRealizer(EdgeRealizer r)

Constructs a new BezierEdgeRealizer as a copy of the given realizer. If the given realizer is not of the same type as this class only the known values will be copied.

Method Detail

createCopy

public EdgeRealizer createCopy(EdgeRealizer er)

Creates a copy of this realizer type that is initialized with the attributes of the given realizer.

Specified by:

createCopy in class EdgeRealizer

createBend

public Bend createBend(double x,
                       double y,
                       Bend refBend,
                       int dir)

Adds a new bend before or after the given reference bend.

Specified by:

createBend in class EdgeRealizer

Parameters:

x - X-coordinate of the Bend

y - Y-coordinate of the Bend

refBend - Bend which should be neighbor

dir - indicates if the new Bend should be added before (Graph.BEFORE) or after (Graph.AFTER) the refBend in the bend sequence of the edge

reInsertBend

public void reInsertBend(Bend bend,
                         Bend refBend,
                         int dir)

Description copied from class: EdgeRealizer

Reinserts a bend to the edge which had been removed before.

Specified by:

reInsertBend in class EdgeRealizer

Parameters:

bend - the bend to be reinserted

refBend - reference bend already contained in this realizer

dir - indicates whether the bend should be inserted before or after the reference bend.Allowed values are Graph.AFTER and Graph.BEFORE.

insertBend

public Bend insertBend(double x,
                       double y)

Inserts a new bend at location (x,y) into this realizer.

If the given coordinates lie on the underlying bezier polygon, a new bend will be added that splits the corresponding segment in two parts. Otherwise, no bend is created (e.g. for coordinates very far away from the bezier polygon).

Specified by:

insertBend in class EdgeRealizer

Parameters:

x - X-coordinates of the bend

y - Y-coordinates of the bend

Returns:

a new Bend instance or null if no bend was created for the given coordinates.

contains

public boolean contains(double x,
                        double y)

Tests whether or not the given coordinate hits the path of this realizer. The behavior of this method depends on the selection state of this realizer. If unselected this hit-test will be performed on the bezier curve path. If selected the hit-test will be performed on the underlying bezier polyline.

Overrides:

contains in class EdgeRealizer

removeBend

public Bend removeBend(Bend b)

Removes a Bend of this realizer

Specified by:

removeBend in class EdgeRealizer

Parameters:

b - Bend to be removed

calculatePath

protected byte calculatePath(java.awt.geom.Point2D sourceIntersectionOut,
                             java.awt.geom.Point2D targetIntersectionOut)

Recalculates the bezier curve path after this realizer has been marked as dirty.

Specified by:

calculatePath in class EdgeRealizer

Parameters:

sourceIntersectionOut - output parameter for the coordinates of the source intersection point calculated by this method.

targetIntersectionOut - output parameter for the coordinates of the target intersection point calculated by this method.

Returns:

either EdgeRealizer.PATH_UNCLIPPED, EdgeRealizer.PATH_CLIPPED_AT_SOURCE, EdgeRealizer.PATH_CLIPPED_AT_TARGET, or EdgeRealizer.PATH_CLIPPED_AT_SOURCE_AND_TARGET

See Also:

EdgeRealizer.path, EdgeRealizer.isPathClippedAtSource(), EdgeRealizer.isPathClippedAtTarget()

calcUnionRect

public void calcUnionRect(java.awt.geom.Rectangle2D r)

Calculate the union of rectangle enclosed by this realizer and r. For efficiency reasons the result is returned by modifying r.

Overrides:

calcUnionRect in class EdgeRealizer

intersects

public boolean intersects(java.awt.geom.Rectangle2D box)

Description copied from class: EdgeRealizer

Checks whether the given rectangle overlaps the edge. This method should be overridden by subclasses. This method assumes that we have straight lines with bends.

Overrides:

intersects in class EdgeRealizer

Parameters:

box - The box that has to be checked on intersection with this edge.

paintHighlightedBends

protected void paintHighlightedBends(java.awt.Graphics2D gfx)

Specialized paint method. Highlights the control points and underlying bezier polyline path if edge is selected

Overrides:

paintHighlightedBends in class EdgeRealizer

write

public void write(java.io.ObjectOutputStream out)
           throws java.io.IOException

Deprecated. Use the GraphML format instead.

Writes out this realizer in a serialized form.

Overrides:

write in class EdgeRealizer

Throws:

java.io.IOException

read

public void read(java.io.ObjectInputStream in)
          throws java.io.IOException,
                 java.lang.ClassNotFoundException

Deprecated. Use the GraphML format instead.

Reads in the serialized form of this realizer. The realizer must have been written out before by it's write(ObjectOutputStream) method.

Overrides:

read in class EdgeRealizer

Throws:

java.io.IOException

java.lang.ClassNotFoundException